Rhinohide Armor™ AL-MITRIMR19-BLK Full Kit Black

This is a suggested model that we are currently crowdfunding for. For more information, watch the video and read our Crowdfunder Terms and Conditions below.

What is Crowdfunder?

2sold of 30

6% funded

This product will only be produced if at least 30 units are supported by August 08, 2021 00:00 (Perth)

Calculating time remaining

Rhinohide Armor™ with Armor-Lock™ is the the ONLY detachable vehicle panel protection system designed for use both on and off-road:

  • Australian designed and patented precision-moulded Rhinohide Armor™ system with 10x times greater panel hold force vs magnet systems.
  • Hassle-free self-installation. Suitable for ALL steel, aluminium and composite body panels with no installation tools or drilling required. 
  • 2mm ABS moulded plastic for greater protection on and off-road, from carparks to the country tracks!
  • Tried and tested in Australia's harshest environments, and rated for 130 km/hr on-road. You can set and forget.
  • Rhinohide Armor-Lock™ Suspension Technology prevents damage from heavy brush, branches, stone chips as well as doors and trolleys in car parks.
  • New proprietary Armor-Lock™ fastening system, with tamper proof security locking key.
  • ARMOR UP your rig with the World’s toughest panel protection system

Crowdfunder T&C's


Crowdfunder Terms & Conditions

You’ve spoken, we listened!

We’ve had a lot of demand for various models of vehicles that we do not currently produce. Our new Armor-lock™ system has caused a massive influx of inquiry.

We want to bring you what you want sooner, so we have developed a crowdfunding campaign to make those models available, but we need your help.

We need you and anyone you know who needs the world’s toughest vehicle protection, to get involved and order a set of Rhinohide Armor™ with our new Armor-Lock™ technology through our website now.

We have minimum requirements that need to be met in terms of number of orders for each model. The number of orders we need to secure before going into production will vary on each model based on the level of tooling we have for a particular model.


Full Tooling Required:

Exciting times - we are looking to add your new model to our available range and you’re helping with making that a reality!

We simply need the demand to complete the design and tooling and to then commence production of your model in our new Armor-Lock™ system. 

We anticipate delivery for your model to be within 14 weeks of the successful campaign being completed (minimum order target being reached).


When will production start?

Production will start IMMEDIATELY upon hitting our target campaign numbers.


What happens to my deposit if the target is not met?

We are setting a time limit on each campaign. If our campaign for a model that you have participated in does not hit it’s required target and does not go ahead, you will be refunded IN FULL within 7 days of the campaign closure date*. Don’t let the opportunity to get your vehicle protected slip through the sands of time, act fast, tell your friends, blast social media!

*we reserve the right to extend the campaign time limit if the campaign achieves at least 80% of funding ahead of closure date.


How can I get my model available sooner?

We have had a lot of inquiries for all of these models that we are offering under crowdfunding. We have been listening and feel that offering pre-order campaigns is the best way to get everyone the models that they want sooner. We are simply making it easy and transparent so that people can help to get their desired model into production.

As soon as we hit our targets, we will go into production. Rally the troops! You can help by sharing our pre-order campaign with friends and likeminded people who also need Rhinohide Armor™ for their vehicles. If you are a member of any social media groups, please don’t hesitate to post links to the campaigns.


What happens if our target is met, but I want to cancel my order?

As we have a significant cost to bring these models online, if the campaign is successful, you cannot cancel your order and you will be required to pay the balance of the deposit before we can ship your Rhinohide Armor™ to you.

Any cancellations after a successful Crowdfunded target is met, will forfeit the deposit.

Tech Overview


SPECIFICATIONS

Rhinohide Armor™ with Armor-Lock™ is the ONLY detachable vehicle panel protection system designed for use both on and off-road. The new Rhinohide Armor™ system is road rated up to 130km/h (max speed in Australia), so you can set and forget and enjoy protection from the carpark to the countryside!

Made from tough 2mm ABS custom moulded high plastic, it’s specifically designed to protect your 4x4 against dents and scratches. The Amor-Lock™ impact protection system provides additional shock absorption and also ensures that there is a small air gap maintained between the car and Rhinohide Armor™, to allow moisture to escape and your paintwork to “breathe”. The air gap further protects your paintwork and allows the system to absorb larger impacts without fear of damage.

 Model Compatibility

  • Designed for compatibility with the Mitsubishi Triton MR (Facelift).
  • Model run 2019 - present

Colours

  • Black

Included in Kit

Rhinohide Armor™ Kit Includes:

  • Precision Moulded Rhinohide Armor™ Panels
  • Proprietary Armor-Lock™ fastening system
  • Security Locking Key
  • Microfibre cloth
  • Step-by-step installation instructions
  • Warranty Registration Card

    Panel Materials

    • High impact, UV and thermally stabilised ABS plastic.
      Temperature Rated for -30 to +80 degrees celsius

    Attachment Method

    • Rhinohide Armor-Lock™ Suspension Technology is suitable for ALL steel, aluminium and composite body panels with no installation tools or drilling required. This patented system has upto 10x times greater panel hold force vs magnet systems, offering hassle-free self installation and trace-free removal.

    Modification Compatible

    • Rhinohide panels can be trimmed to accommodate after-market accessories including snorkels.
    • For best results, use strong workshop shears or tin snips to cut the ABS plastic panel for desired modification.

    Customisation Compatible

    • Rhinohide Armor panels are fully customisable, and can be painted or custom wrapped with graphics. Logos or other stickers can be applied.
    • We recommend a professional sign-writer or spray shop for best results.

    Weight (packed)

    • ≈18kgs

    Dimensions (packed)

    • 135cm x 99cm x 20cm

    Speed Rating

    • The new Rhinohide Armor™ with our proprietary Armor-lock™ attachment system is road rated up to 130km/h (max speed in Australia), so you can set and forget and enjoy protection from carparks to the countryside!

    Fitting & Care

    Please take the time to read and understand the correct installation and care instructions for your Rhinohide Armor™ with Armor-Lock™ panels and watch the video below.

     

    CAUTION

    • Failure to correctly install Rhinohide Armor™ with Armor-Lock™ as per the Manufacturer instructions could result in serious damage to the Rhinohide panels and/or vehicle and/or serious injury to others.
    • Failure to comply with the correct installation instructions will void the Rhinohide Armor™ warranty.
    • If not correctly installed as per Manufacturer’s instructions, external forces/objects may cause the Rhinohide Armor™ panels to detach from the vehicle during use. You must pay particular attention to the minimum clearances required on the leading edges of the doors and wait for 24hrs for the pressure sensitive 3M adhesive on the bases on initial install before driving with the panels on the vehicle.
    • ALL Rhinohide Armor™ Armor-Lock™ fasteners must be engaged before any use on or off road.

    IMPORTANT MESSAGE

    Rhinohide Armor™ with Armor-Lock™ has been Tried and tested in Australia's harshest environments, and rated for 130 km/hr on-road.

    INSTALLATION

    The following is a brief overview of installation and care, and the full installation manual should read prior to installation. The full installation manual is included in the box and can also be downloaded in the customer care section of our website.

    PREPARATION (Important - Only apply Rhinohide to a clean vehicle)

    Before the initial installation of Rhinohide Armor™ with Armor-Lock™ on your vehicle, it is important to make sure the vehicle is clean of dirt and debris. We recommend wiping the vehicle surface with isopropyl alcohol to ensure the proper adhesion of the Armor-Lock™ base plates.

    Any dirt, mud, snow or other environmental contaminants on your vehicle may affect the panel hold force to the vehicle and may also cause scratching to the vehicle’s surface. Your vehicle must be free of this debris before initial installation. Once base plates have been attached and have cured (24hrs), the Rhinohide Armor™ panels can be installed on vehicles that are not spotlessly clean, provided they are not caked in mud or other debris.

    We recommend that Rhinohide Armor™ is installed on your vehicle prior to any off-road use.

    LEADING EDGE CLEARANCES (Important - install Rhinohide Armor™ correctly on your vehicle)

    Rhinohide Armor™ with Armor-Lock™ has been carefully engineered to fit the vehicle and enable operation of all doors whilst in place on the vehicle.

    It is very important to ensure the leading edge of each Rhinohide Armor™ panel has sufficient clearance on the leading edge of the door panel that it is being attached to. This will ensure Rhinohide Armor™ does not interfere with the normal operation of the doors. A chart of clearances required for specific vehicle types can be found in the Instruction Manual.

    Failure to allow correct leading edge margin may result in the Rhinohide Armor™ panel leading edge rubbing against the vehicle when the doors are opened. Please ensure that you follow the test-fit procedure and align the leading edge correctly. Once the backing plates are installed, they cannot be re-used/moved on the vehicle, and you will need to replace them to ensure correct fitment.

    Correct installation will result in completely operable doors, no leading edges protruding forward from the vehicle door leading edge and Rhinohide Armor™ conforming to the vehicle’s surface with no protrusions or misaligned panels.

    CARE DURING USE

    EXTENDED JOURNEYS - REGULAR INSPECTION AND CLEANING

    If you are using Rhinohide Armor™ on an extended journey it is imperative that you inspect the panels REGULARLY to ensure dirt, mud or large debris has not become trapped on the internal surface of the panels.

    Your Rhinohide Armor™ kit comes with a microfibre cloth to help brush any debris from the panel if encountered. The microfibre should be used to wipe any excess dirt, mud or large debris off your paintwork before reattaching the Rhinohide Armor™ panels.

    Important - Inspect your Rhinohide Armor™ regularly during use to ensure that they are locked, and to ensure that there is no significant debris between the panel and your paintwork. If left unattended these particles WILL DAMAGE YOUR CAR.

    REMOVAL OF EXCESS MUD/DIRT/SNOW BUILD UP (Important - Remove excess mud/snow from Rhinohide panels)

    Mud, dirt and snow may collect and build up over time on the Rhinohide Armor™ surface. If this is the case, please ensure excess mud, snow and dirt is regularly scraped off the Rhinohide Armor™ panels.

    Excess build up of mud/snow/dirt will add to the weight of the Rhinohide Armor™ panels, and excess mud build up may increase the risk of a snag point for branches and other objects.

    Simply brush off any build up by hand or use a shovel edge if needed to dislodge excessive mud or snow build up on the panels before continuing your journey.

    REMOVAL

    The Rhinohide Armor™ with Armor-Lock™ system is unique in its ability to be easily installed and removed from the vehicle.

    To take the panels off your vehicle, leaving the bases on the vehicle, our new proprietary Armor-Lock™ tamper proof fastening system comes with a security locking key. Just as you installed the panels, simply use the key to unlock each of the Amor-Locks, starting at the bottom of the panel first.

    In order to completely remove Rhinohide Armor™ with Armor-Lock™ from your vehicle, please watch the following video:

    PACKING AND STORING

    Rhinohide Armor™ with Armor-Lock™ comes complete in a convenient and bespoke storage bag. Although Rhinohide Armor™ with Armor-Lock™ can be left on your vehicle at all times, there may be times when you need to store it away. If so, it should be stored in a cool dry environment when in the bag with no heavy objects placed on the bag.

    The Rhinohide Armor™ with Armor-Lock™system is at its most vulnerable when in the carry bag and heavy objects placed on the bag may cause damage/deformation to the panels.

    Before repacking the Rhinohide Armor™ panels into the bag, it is a good idea to make sure the panels are free of mud/dirt and debris, this stops dirt on the outside of the panel transferring to the internal face which will be close to your vehicle the next time you use the Rhinohide Armor™ product.

    It is best to pack panels external (plastic) side down in the bag. Start with the largest door panels and then pack in order of size down to the smallest panels. This will ensure a safe and compact fit within the bag.

    Tip - Cleaning the Rhinohide Armor™ panels on the vehicle is a lot easier than off the vehicle. Simply spray down with a normal pressure hose and wash with your usual car cleaning detergent. Rinse when done and leave panels to dry in a shady area before packing back in the carry bag. NB: Citrus based cleaners CANNOT be used on the Rhinohide Armor™ product.

    Shipping

    FREE SHIPPING TO ALL AUSTRALIAN METRO AREAS.

    We use predominantly AirRoad Direct and Toll IPEC to ship our products to you.

    All shipments are fully insured and you will receive a tracking number so you can follow the progress of your order.

    Surcharges may apply for deliveries to remote and rural locations.

    Warranty

    MONEY BACK GUARANTEE

    Don’t like the fit, the look, the finish? Don’t worry, return your kit.

    We are confident you will love the look and quality of your Rhinohide Armor™ with Armor-Lock™ kit as much as we do. However, in the unlikely event you trial fit your Rhinohide Armor™  to your car and are not completely happy with the look or fit of the Rhinohide panels, we will refund your initial purchase only (dry run, no adhesive tape protection removed or modifications made and kit remains in saleable condition with all componentry).

    Terms & Conditions

    • 30 Day Money Back Guarantee valid from date of purchase.
    • The Rhinohide Armor™ with Armor-Lock™ kit must be returned unused. The guarantee is to ensure you are happy with the look, fit and quality of the product. Once used, your Rhinohide Armor™ is covered by our 12 month warranty policy below.
    • The product must also be returned in its original packaging, including the complete kit of panels, all componentry, carry bag and the box it came in and be in suitable condition for re-sale (to be determined by Rhino Hide Pty Ltd).
    • Our 30 day money back guarantee covers the original price paid for the product only. 
    • Return of the full Rhinohide Armor™ kit as described above, to the Western Australian Rhinohide Warehouse is at the purchaser's own expense.
    • This return policy is only valid for customers who purchase Rhinohide Armor™ online directly through the www.rhinohide.com.au website.
    • We are reasonable people and want a positive experience for all of our customers, even those who decide to return our items within the 30 Day Money Back Guarantee period. Refunds will not be unreasonably withheld, but we do need to inspect the goods prior to issuing a refund.

    Please contact us at sales@rhinohide.com.au for additional information on our return process.

    RHINOHIDE WARRANTY

    RHINOHIDE 12 MONTH WARRANTY

    Rhino Hide Pty Ltd (the manufacturers of the Rhinohide Armor™ with Armor-Lock™ system) warrants the Rhinohide Armor™ system to be free of manufacturer’s defects and will repair or replace the product at its own discretion, for a period of 12 months from the original date of purchase.

    WARRANTY TERMS & CONDITIONS

    • The warranty only applies when the Rhinohide Armor™ panels have been used in accordance with the manufacturer’s recommendations and limitations.
    • The warranty does not cover damages or failure resulting from improper use, acts of nature, abuse, alteration, accident, misuse, negligence, or general wear and tear.
    • Please keep the original copy of your receipt as proof of purchase to process a warranty claim. 
    • Defective panels must be returned to Rhinohide at the customer’s expense for assessment. If deemed faulty, Rhino Hide Pty Ltd will cover the cost of shipping the replacement part to the customer within Australian metro centres. Additional shipping fees may be charged for rural areas.

    LIMITS OF LIABILITY

    Rhino Hide Pty Ltd is not liable for damages to other property including the primary vehicle that Rhinohide Armor™ with Armor-Lock™ is being applied to, caused by defects in its products, loss of use of the product, loss of time, commercial loss or any other damages, whether real, incidental or consequential. 

    The benefits conferred by this warranty are additional to all other conditions, rights and remedies.

     

    PROCESSING A WARRANTY CLAIM

    In order to process a warranty claim, please contact us at sales@rhinohide.com.au

    Faqs


    Watch Rhinohide Armor™ with Armor-Lock™ founder Marc Berryman answer some of the most frequently asked questions about Rhinohide in the video below including:

    • What is Rhinohide Armor™ with Armor-Lock™? Overview of construction and protection qualities.
    • How to fit Rhinohide Armor™ with Armor-Lock™ panels to your car.
    • Completing modifications to accommodate other aftermarket accessories
    • Demonstrating Rhinohide Armor™ with Armor-Lock™ in action.

    Please visit our FAQ page for more answers and customer support contact details.